Stock graphics. I did see some info on config files, but do not have access to a Mac. Anyone else out there have any success with this hardware I wonder? Am I stuck without access to a Mac? You can access to MacOS. I do appreciate the response. After giving up on trying the image posted earlier in this thread, I spent an afternoon on Virtualbox, following a couple of different howtos, and never could get the virtual machine to boot Snow Leopard. I may have access to an old Mac Mini at some point. Might just wait for that.dotirafoden.cf/548.php
Install Mac OS X Sierra in PC
I said incorrectly said Ivy Bridge in my post, but on further inspection this HP appears to be a Haswell, with a H87 chipset and Intel graphics. Has anyone been successful with one of these or similar? Yeah, you can use this. Watch the full video tutorial on our Youtube channel: No, definitely you will not lose your laptop. If you failed to install macOS Sierra on your notebook then all you need to reinstall Windows again, and it will be normal.
How to Dual Boot Windows 10 and macOS Sierra on PC - Hackintosh
Google drive link not working… I have ideapad with core i3 and 4gb ram.. I tried different ways, creating bootable usb from Mac OS or on windows 10 as mentioned in the beginning of this article and with win32diskimager. Have you placed your system config. If yes then change the config. And the screen frozed with those few lines showing some return address. Of course I used a correct config. My laptop specification: I used the raw file from install from Windows machine. I hope for quick reply. What do I do? After booting the usb and starting the install my screen shows a few lines of code and then turn black.
After booting the usb and starting the install, my screen crashed and it looks like this. Can you help? Can you recommend me the boot flag should I get? But neither way can walk me to the Apple logo. Hello There Will this work with my pc Intel Core i3 3. I need your help. What happened to my toshiba satellite laptop. When I begin boot from bootable USB mac , screen stopped here and showed: Not yet set …. Please Check out this exclusive guide it for Lenovo: TransMac on Win: No, it will not if you install it on empty partition or drive but if you select the whole hard drive and select clean then Yes defiantly it will delete all the DATA.
What is the best and work config. Everytime i try and put in a config file. I googled the config file for it but got nothing, Help please! Try to boot with your system boot flag. You can find a sample here: Check out this article once: Actually im using config. Dont know what to do. Actually i had created a new config. To fix your Keyboard and mouse problem follow this article: The when I just read a blog, I really hope it doesnt disappoint me approximately this place.
Get real, Yes, it was my choice to read, but I just thought youd have some thing intriguing to express. All I hear can be a couple of whining about something that you could fix if you werent too busy interested in attention. Any idea? Later on, you have to fix the Ethernet. Network issue. Thank You Everything is working just my sound card asus xonar ds 7. Welcome dear, happy that you found this helpful So for that you need to do a post installation. Check this article: After installation I get stuck on the apple logo shredded horizontally.
I got this when installing from USB but this disappeared after 30 sec. I am able to boot with -v and -s but it crashes after the internet setting. Any help? I did no clean installation and no post installation. Also, I did not use any boot flags when installing from USB boot except for the ones which were already turned on. Hey dear, After installing macOS then you need to do a post installation to install and fix bootloader and other drivers.
Besides that, when in safe mode: But when booting the installed mac OS it gets stuck at an odd screen. The apple logo with the loading bar is schredded horizontally. This happend for a few seconds when booting from USB. But this on clover screen use the same options and select macOS disk and go ahead. I already created a bootable usb from windows I dont know what to do. Hey you need a post installation then follow this article: My question is affter the doual Boot windows10 and macOS, how will be performance of computer?
Will It became slower? LGA Type: Check the article here: Do i have to erase my whole hardisk to install sierra? Yeah, you can install it on that drive. For example: Otherwise, it will not work. Check this article for the post installation guide: Hey, I do as given instructions.. Mac OS Sierra successfully installed.. But audio, ethernet, wi-fi not working… I do twice and thrice and so on as per instructions but nothing happens..
Also after first restart usb detection also cant works.. Plz help. You can fix your problem here: I follow your instructions and get clover to boot. A bunch of text comes up and then it goes into a gray or white screen. Use another config. Thanks a lot in advance for your assistance! Yes dear, it can be due to the incompatibility of your laptop but still you have the chance to boot into USB Installer and install it on your Laptop.
Can I install Sierra on HP actx? I think its related to the boot and it cannot boot so the black screen appears. I taught myself the clover stuff and now I know a lot. I put some boot flags and checked many options but still the black screen comes up. I made the installer again for few times with usb3 device but still the black screen. Hi, I have an Asys s46 laptop which pretty much same as yours except that it has nvidia m instead of m. Were you able to install mac os successfully in your machine? I opened my system settings and although all the.
Also, I have to boot using the USB stick. Contact me for logs etc. I used the Nvidia Gen2 config for my GeForce M card and here is a link for my laptop specs; https: Included Ethernet or Wifi Problem. My System is a dell inspiron laptop with the following specs i gen 1. Did you replace the config. If Yes. What config. Which type of USB installer do you use? Now, which method you have used for you demonstration.
Now, which method you have used for your demonstration. I have used three methods to create the bootable USB, unibeast, following terminal code, and transmac. Unfortunately with these, I always get stuck at apple boot logo, after clover GUI. I have the same problem. I also tried to use a newer version of Clover, but no changes. What can I do?
My SSD will not show in disk utility. Turned everything else off that was explained. No problem thank u for your time. OR better then this way? Yes I put the 5xx one in the USB installer. Can see the USB no problem. Send your full specification. I have half my ssd in Windows disk partition manager left the free space unalocated.
Do I need to put that free space as a partition in windows disk manager and then install Mac OS. Use this article to know how to create new drive: Load Optimized Defaults 3. If your system has CFG-Lock, disable it 5. If your system has Secure Boot Mode, disable it 6. If your system has IO SerialPort, disable it 8. Save and exit. There is no other way. Or is there cases where these options are not there.
Hey, have you placed your system config. Hello, Faiz Orz, thanks for your tutorial, but I have a problem. I can do this over and over again. What do I have to do please? HFS Drive. Thank you for your time!! I can describe my work… 1. I finish installation, restart PC 2.
BUT I have here only these options: No System detected on this HD. I just had to clean whole disk again and formate it. Could we please communicate through e-mail, if you hava a time for me? Can you tell me where was the problem? Give a try to MultiBeast and download Nvidia Driver from here: Did you partition your Entire Disk or a single volume? Can you please reply me and help me with it. I already tried it on PC which worked fine. Now when I am trying to Install it on Laptop I am getting the above error. Is there any alternate way to create a bootable drive using any other software apart from Unibeast.
But once i get to the disk utility, it is not detecting my Internal hard drive. Only detecting my USB bootable stick. I have already partition out an empty drive from my main drive but still nothing. Please help me! Below are my notebook specs:.
How to Dual Boot Windows 10 and macOS Sierra on PC
I have checked all the options in BIOS including the hard drive but the options are very different from the Lenovo in your video. There is no SATA but only to switched which drive to boot first.. If this is the case, why my internal drive not appearing on mac disk utility?
Any ideas? So why my internal drive not appearing in mac disk utility? Hi I too was facing this issue previously. I solved this by deleting the drive completely I mean it should not be an active partition keep it has unallocated drive. Hope this helps you.
- adobe photoshop cs6 for mac cracked;
- mac os x nach bestimmter zeit herunterfahren?
- my recipes creamy mac and cheese;
- partitie maken mac os x;
Yes dear, You can give a try. First, create USB Installer by this way: Watch the video tutorial carefully: Can you switch between Windows and Mac? And do you keep all your files on Windows or wil they delete? Yes dear, you can switch between macOS and Windows. Get help from here: When booting from the usb the setup gets stuck where it is constantly showing to connect an apple mouse.
I am installing in windows 10 in a dell laptop. On that cause use an external Mouse and keyboard to continue the installation after that you have to install the drivers manually. When you complete the installation then use this article for post installation: Get help to install drivers from here: Transmac doesnt write sierra. Follow this guide to fix Operating system not Found error, and your Windows 10 will work fine: Notify me of follow-up comments by email. Notify me of new posts by email.
This site uses Akismet to reduce spam. Learn how your comment data is processed. Mac OS. BIOS Setup. Exit Saving Changes. Utilities Disk Utility. Erase Free Disk. Erase Free Partition Drive. Erase Process Completed. Setup the Installation of macOS Sierra. Install macOS on…. Boot From Mac HD. Choose Language. Choose Keyboard Layout. Transfer Information to this Mac. Enable Location Services. Terms and Conditions. Create a Computer Account.
Diagnostics and Usage. Setting up macOS Sierra. Share Share. Prev Article. Next Article. Roy Keiko. Hi Mukhtar, thank you i did install sucessfully. Mukhtar Jafari. I truly benefited from this article. Faiz Orz. Scroll down and click Unibeast. Make sure you click the version of Unibeast that has the highest number next to it. For example, the current release of Unibeast as of May is 8. Click Download Now. It's in the top-right corner of the page.
Doing so will download Unibeast onto your Mac. Download Multibeast. This program, which is hosted on the same site as Unibeast, will allow you to install drivers so that you can use things like your PC's speakers, the Internet, and so on: Double-click the Downloads tab again. Click Multibeast - High Sierra Open your Mac's. Click the search bar. It's in the upper-right side of the App Store window.
Search for High Sierra. Click Download. It's to the right of the High Sierra icon. Doing so will prompt the installer to begin downloading onto your Mac. Wait for the installer window to open. Once it does, you'll need to close it immediately. This will close the installer window. Click the Applications folder. It's on the left side of the Finder window. Make sure that the installer is there. The installer will be called "Install macOS High Sierra" or something similar and will have an image of a ridge of mountains on it. As long as the installer is present in the Applications folder, you can proceed.
If the installer isn't there, try downloading High Sierra again. Plug your USB drive into your Mac. This is the gigabyte minimum flash drive that you'll use to install macOS High Sierra on your computer. Open Spotlight. Type disk utility into Spotlight. This will search your Mac for the Disk Utility app. Click Disk Utility. It's below the Spotlight search bar.
Doing so will open Disk Utility. Select your USB drive. Click the USB drive's name in the upper-left side of the window. Click the Erase tab. It's near the top of the window. A pop-up box will appear. Click the "Format" drop-down box. You'll find this in the middle of the pop-up box. Clicking it prompts a drop-down menu. This will set your USB drive's file system to that of your Mac.
Click the "Scheme" drop-down box.
It's below the "Format" drop-down box. This option is in the "Format" drop-down menu. Click Erase. Doing so will reformat your USB drive to your Mac's file system. Click Done when prompted. You can now proceed with creating your installation drive. Open the Unibeast folder. Double-click the Unibeast folder to unzip and open it. Click Open when prompted. Doing so will open the Unibeast setup window.
If your Mac is currently running macOS Sierra or higher, you'll have to verify the Unibeast installation before continuing. Click Continue four times. It's in the bottom-right corner of the first four pages of the Unibeast setup window. Click Agree when prompted. It's at the top of the window. Select your USB drive, then click Continue.
So what’s new on macOS Sierra 10.12 Final?
Click the USB drive's name to select it. Select High Sierra , then click Continue. You should see High Sierra in the middle of the page. Select a motherboard type. Select a graphics card option if necessary, then click Continue. Check the box next to Inject [card name] for your preferred graphics card settings.
If your graphics card supports macOS High Sierra by default, skip this step. Click Continue. It's in the bottom-right corner of the page. Doing so will prompt you to enter your Mac's password. Enter your Mac's password. Type in the password you use to log into your Mac. Click OK. This will prompt Unibeast to begin installing to the USB drive. While the Unibeast installation finishes up, you should change your Windows computer's boot order. Unplug any USB items from your Windows computer.
Make sure that you don't have any USB drives, in particular. This process varies from computer to computer, but you will typically restart your computer and then repeatedly press a key e. Locate the "Boot Order" section. This section is normally on the main page of the BIOS, though you may need to use the arrow keys to navigate over to the "Boot" or "Advanced" tab.
Select Removable Devices. Use the arrow keys to move the blinking bar down to Removable Devices. On some pages, this section may instead be called USB Devices or something similar e. Move your selected location to the top of the list. You can double-check the key that you're supposed to use in the legend that's usually on the right side or the bottom of the BIOS page.
Save your settings and exit the BIOS. Look for the key you're supposed to press to save and exit in the legend on the right side of the page, then press it. Doing so will shift your Windows computer's boot priority so that installation USB drive will be selected as the boot point once you plug it in. You may have to press another key to confirm this choice. Place Multibeast on the USB drive. Open the USB drive's folder, then drag the Multibeast file into the folder. You'll need to use Multibeast later, so having it on the flash drive will make using it when necessary as simple as possible.
After doing so, you can remove your USB drive. You should make sure that the Unibeast installation is complete before doing this. Shut down your Windows computer. Press and hold the Power button on your Windows computer until your computer shuts down completely. This will usually occur one or two seconds after the computer's display turns off.
Plug both the Unibeast USB drive and the blank hard drive into your computer. These should both fit into USB ports on your computer. Start your Windows computer.
- Related Articles.
- iphoto for mac os x yosemite?
- 1. Télécharger OS X Yosemite.
- Installer OS X Yosemite sur votre PC Intel en 5 étapes?
- download call of duty for mac os x.
Press the Power button to start the computer. Once the computer has a chance to begin booting, it should select your plugged-in USB drive as a place from which to boot. This will begin the macOS installation process. Doing so takes you to the next page of the installer.
Click Continue twice. It's in the bottom-right corner of the pages. You'll see this at the top of the screen. Click the Utilities menu item. This menu item is in the top-left side of the screen. A drop-down menu will appear. It's in the drop-down menu. Select the blank hard drive.
Click the blank hard drive's name on the left side of the page. It's near the top of the page. Format the blank hard drive. Change the following fields: Doing so will reformat your blank hard drive for macOS' file system. Click Done when prompted, then close the Disk Utility window. You can now proceed with installing macOS High Sierra on the hard drive. Click the blank hard drive's name, then click Continue.
This will both select the hard drive as the installation point and begin installing macOS High Sierra. Wait for macOS High Sierra to finish installing. This process should take around 15 minutes. Follow the on-screen prompts. You'll be prompted to enter specific information, such as your name, a password, your preferred language, your location, and so on. Once you complete this setup process, macOS' software will be completely set up on your Windows computer.